Using squeeze feeds
Squeeze feeds (Pat Pending) are our solution to the ink flow problem in fountain pens. They are designed to do the following:
- Grip the nib firmly and hold it in the pen,
- Feed ink and paint to the nib in a measured flow designed for the viscosity of the ink or paint,
- Feed different inks and paints to nibs in the same pen,
- Feed ink and paint to nibs that can change shape while in use, such as flexing and splaying,
- Prevent leakage from the feed or nib to other surfaces.
These advantages are important when working with flexible nibs that can change shape when they flex, and when working with a wide variety of artistic media including fountain pen ink as well as pigmented inks and permanent inks including India ink.
Inserting Squeeze feeds
| Squeeze feeds are small items that require careful handling. |  |
| You begin by inserting a nib designed for the Squeeze feed into the feed. |  |
| Next press the nib and Squeeze feed into the front of the pen and all the way back so the feed sits firmly in the pen.You might have to twist and wiggle the feed to seat it correctly. Look into the back of the section to make sure the tit is flush inside. |  |
Once the nib and Squeeze feed are inserted correctly, you can start drawing and writing.
Removing Squeeze feeds
You must remove the Squeeze feed to replace nibs, remove nibs for cleaning, and when you clean the pen. Try not to handle squeeze feeds frequently.
- Pull out the Squeeze feed containing a nib from the front of the pen. You might have to spin or twist the feed to dislodge dried ink. Be careful when you do this - squeeze feeds containing nibs are small parts with sharp edges.
- If the feed seems locked into the pen, push it out from the back. Unscrew the front of the pen, place a firm narrow rod on the back of the Squeeze feed.
- Gently tap the rod to push out the Squeeze feed. Increase the pressure of your tapping if you have to. We pack one stick with every order that contains a Squeeze feed. You can use other rods if they fit. Soft wood material is best.
For more info . .
- About feeds and flow
- About Squeeze feeds
